-

Specifications
1,Rated Voltage:0.66KV
2,Insulation Voltage:3500V
3,Rated Frequency:50HZ/60HZ
4,Operating Temperature:-20ºCto 70ºC
5,Certificates:UL,CE ,ROHS
Features
1,Small cost
2,Split core design ,Easier installation
3 Build diode ,no high voltage danager
4,Good linearity at very low current
-

Features:
Rated primary current: 100 to 5, 000A AC
Rated secondary current: 5 or 1A AC
Rated load: 1, 2.5, 5.0, 10 and 30VA
Accuracy: 0.5, 1.0 and 3.0 class
Rated short-time thermal current (Ith): 20In
Rated dynamic current (Idyn): 2.5Ith
Highest voltage for equipment (Um): 720V AC RMS
Rated power-frequency withstand voltage: 3, 000V AC RMS
Frequency range: 50/60Hz
Operating temperature: -15 to 60° C
Split core design, safer, easy to install and portable
Accessories: Supplied with feet for base mounting if required
Applications:
Current, power, energy and monitoring devices
Relay protection devices
Power factor correction devices
Available in 5 standard sizes
Standard: IEC 60044-1
RoHS Directive-compliant
-

HTP225A miniature voltage transformer is designed for
applications where AC voltage signals must be transformed
accurately into a lower voltage signal appropriate for micro-
processor based circuits. HTP225A current-type voltage
transformer is a kind of mA current transformer, which turn ratio
between primary and secondary is similar to 1:1. a limiting resistor is
nessary to be in it with primary winding.ZMPT101C is popular to a
limited internal space of devices.
-

Features
Voltage level: 0.66/0.72KV;
Withstand voltage level: 3KV/1Min;
Rated frequency: 50/60HZ;
Operating temperature: -259C~ 55°C;
-

Features
Low cost. low profile for PCB mounting
High accuracy,wide linear range,low phase shift error
Burn-resistant case and filler
-

D-C2T series dismountable hall effect current Sensor is…
-

D-C3T series dismountable hall effect current Sensor is an open loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC currents.
-

Specifications
1,Rated Voltage:0.66KV
2,Insulation Voltage:3500V
3,Rated Frequency:50HZ/60HZ
4,Operating Temperature:-20ºCto 70ºC
5,Certificates:CE ,ROHS
-

Specifications
1,Rated Voltage:0.66KV
2,Insulation Voltage:3500V
3,Rated Frequency:50HZ/60HZ
4,Operating Temperature:-20ºCto 70ºC
5,Certificates:CE ,ROHS
-

Specifications
1,Rated Voltage:0.66KV
2,Insulation Voltage:3500V
3,Rated Frequency:50HZ/60HZ
4,Operating Temperature:-20ºCto 70ºC
5,Certificates:CE ,ROHS
-

Specifications
1,Rated Voltage:0.66KV
2,Insulation Voltage:3500V
3,Rated Frequency:50HZ/60HZ
4,Operating Temperature:-20ºCto 70ºC
5,Certificates:CE ,ROHS
-

Features
Rated Current 50A to 3000A loads.
Rated output: 0.333Vac ,mA ,mV,1A and 5Aac output
Accuracy: ±0.5%
Phase Angle: ±0.5%
Withstand Voltage:5400Vac/1mA/1min
Operating Temperature:-30℃to 55℃.
Frequency Range:50-400Hz
Leads:2.4M,UL 1015,Twisted Pair
UL&CE recognized. RoHS Compliant
Output and leads can be customized
-

SPECIFICATIONS:
1、Rated Voltage:0.66KV
2、Insulation Voltage:3KV
3、Rated Frequency:50HZ or 60HZ
4、Operating Temperature:-15℃ to 60℃
5、Flame resistance:UL94-V0
6、Certificates:CE、UL2808
-

SPECIFICATIONS:
1、Rated Voltage:0.66KV
2、Insulation Voltage:3KV
3、Rated Frequency:50HZ or 60HZ
4、Operating Temperature:-15℃ to 60℃
5、Flame resistance:UL94-V0
6、Certificates:CE、UL2808
-

SPECIFICATIONS:
1、Rated Voltage:0.66KV
2、Insulation Voltage:3KV
3、Rated Frequency:50HZ or 60HZ
4、Operating Temperature:-15℃ to 60℃
5、Flame resistance:UL94-V0
6、Certificates:CE、UL2808
-

SPECIFICATIONS:
1、Rated Voltage:0.66KV
2、Insulation Voltage:3KV
3、Rated Frequency:50HZ or 60HZ
4、Operating Temperature:-15℃ to 60℃
5、Flame resistance:UL94-V0
6、Certificates:CE、UL2808